Flat roof repairs & replacement in Rockwood,Guelph,Acton,Georgetown | Thatcanadianroofer

TPO membrane, short for Thermoplastic Polyolefin, is a single-ply roofing membrane commonly used on flat and low-slope roofs for commercial, industrial, and residential buildings.

Main benefits

Redcued heat absorption ✅️

Energy efficiency ✅️

UV Resistance ✅️

strong heat welded seams ✅️

Lower maintenance ✅️

Improved Durability ✅️

Clean and modern aesthetics ✅️

For property owners looking for a clean, modern, and efficient roofing option, TPO is often a smart solution for long-term roof protection.

PVC membrane, short for Polyvinyl Chloride, is a single-ply roofing membrane commonly used on flat and low-slope roofs where strong waterproofing and chemical resistance matter.

Main benefits

Chemical resistance ✅️

Puncture resistance ✅️

Low maintenance ✅️

Strong heat welded seams ✅️

Durability ✅️

Clean and modern aesthethics ✅️

PVC is a Strong choice for any commercial, industrial building owners looking for high chemical & puncture resistance .

EPDM membrane, short for Ethylene Propylene Diene Monomer, is a synthetic rubber single-ply roofing membrane commonly used on flat and low-slope roofs.

Main benefits

High flexibility ✅️

Temperature performance ✅️

Easily maintained ✅️

Flameless installation ✅️

Durability ✅️

For property owners looking for a dependable rubber roofing system with strong long-term performance, EPDM is a solid option.

Modified bitumen membrane is an asphalt-based roofing membrane reinforced with materials such as polyester or fiberglass and modified with polymers for better flexibility and performance.

Main benefits

2 layers of waterproofing ✅️

Puncture resistance ✅️

Multiple application methods ✅️

Weather resistance ✅️

Easily repaired ✅️

Modified bitumen can be installed using methods such as torch-applied, self-adhered, or cold-applied systems, depending on the building, safety requirements, and project design. Its biggest advantages are durability, repairability, weather resistance, and a heavier-duty feel compared to many single-ply systems.

B.U.R., short for Built-Up Roofing, is not a single sheet membrane like TPO, PVC, or EPDM. It is a multi-layer asphalt roofing system made by alternating layers of bitumen and ply sheets.

Main Benefits

4 layers of water proofing ✅️

High puncture resistance ✅️

Multiple finishes ✅️

Impact resistance ✅️

B.U.R. has been used for a long time on commercial flat and low-slope roofs because the multiple layers create redundancy, strength, and strong weather protection. It can be finished with gravel, aggregate, cap sheet, or coating depending on the system design.it is a dangerous system to install and requires a kettle to heat the asphalt before application.

Page updated

Report abuse